Xantrex Freedom Xi 1000 Owner's Manual page 22

Freedom Inverter Configuration
Adjusting Feature Settings
The Power and Select buttons can be used to:
• change the inverter mode setting
• disable or enable the audible alarm
• change the shutdown setting
• return to factory default settings
Inverter
Power button
Status
LED light
Info and Settings LED lights
Figure 2 Display Panel
To cycle through the various feature settings:
1. Press and hold the Inverter Power button for five seconds to
enter the feature settings mode.
2. Press the Inverter Power button to toggle between the following
information:
8
Setting
Inverter Mode Setting
Alarm Setting
Shutdown Setting
Factory Setting
To change the inverter mode setting:
By default the inverter mode is set to ON ("").
LED
1. Press and hold the Inverter Power button for five seconds.
screen
2. Press the Inverter Power button until the LED screen flashes
"" intermittently.
3. Press the Select button once.
The LED screen will display the present (or most recent)
inverter mode setting.

Inverter mode setting is ON with Power
Save feature
 Inverter mode setting is ON without Power
Save feature

Inverter mode setting is OFF
LED Screen




Freedom Xi Owner's Guide