Xantrex Freedom Xi 1000 Owner's Manual page 10

Precautions When Placing the Inverter
WARNING
FIRE HAZARD
Do not install the inverter or any part of its supplied wiring in engine
compartments.
Failure to follow these instructions can result in death or serious injury.
CAUTION
BURN HAZARD
Avoid touching the external surfaces - heatsink may be hot.
Failure to follow these instructions can result in minor or moderate injury.
RISK OF DAMAGE TO THE INVERTER
• Never allow battery acid to drip on the inverter when reading gravity,
or filling battery.
• Never place the Freedom Xi Sine Wave Inverter unit directly above
batteries; gases from a battery will corrode and damage the inverter.
• Do not place a battery on top of the inverter.
Failure to follow these instructions can damage the unit and/or equipment.
viii
NOTICE
Regulatory
The Freedom Xi Sine Wave Inverter is certified to appropriate US and
Canadian standards. For more information see "Regulatory Approvals" on
page 32.
The Freedom Xi Sine Wave Inverter is intended to be used for mobile or
commercial applications. This Inverter is designed for marine applications
only when additional drip protection is installed in certain orientations. See
the section on Specifications for information.
Freedom Xi Owner's Guide