DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
•
Apply appropriate personal protective equipment (PPE) and follow
safe electrical work practices. See NFPA 70E or CSA Z462.
•
This equipment must only be installed and serviced by qualified
electrical personnel.
•
Turn off all power supplying this equipment before working on or
inside equipment.
•
Always use a properly rated voltage sensing device to confirm power
is off.
•
Replace all devices, doors, and covers before turning on power to this
equipment.
Failure to follow these instructions will result in death or serious injury.
975-0754-01-01
WARNING
FIRE AND EXPLOSION HAZARD
•
Unit's components may produce arcs or sparks.
•
Do not install near batteries, in machinery space, or in an area in
which ignition-protected equipment is required.
Failure to follow these instructions can result in death or serious
injury.
Areas include any space containing gasoline-powered machinery, fuel
tanks, as well as joints, fittings, or other connections between components
of the fuel system.
v