Basic Settings; Overview - Honeywell NetAXS-123 User Manual

Basic Settings

Overview

This chapter explains the NetAXS-123 configuration functions as accessed via the web
server. These functions should be performed only by the system administrator or service
personnel.
CAUTION: The sequence of NetAXS-123 configuration
tasks is critical. If you do not follow the sequence
described in
configured
, the system cannot be successfully
Table 2-1
.
Table 2-1 Configuration Task Sequence
To...
Configure the System
via EVL (Ethernet
Virtual Loop)
OR
Configure the system
via RS485
Initial panel setup
Configuring schedules
Configuring spaces
Configuring people and
cards
Configuring access
groups
Note Screen captures taken on a Windows 7 platform. If you use another OS, then
the GUI might be different.
Go here...
Configuring the EVL (Ethernet Virtual Group) on page 16
Configuring the System Via RS-485 Loop on page 20
Initial Panel Setup on page 28
Configuring Schedules on page 35
Configuring Spaces on page 39
Configuring People and Cards on page 65
Configuring Access Groups on page 72
| 15
2
800-05168V5 - A - 02/2018