6 |
NetAXS-123 Access Control Unit User's Guide
Setting Up the USB Connection
WARNING
AFTER the drivers are installed.
1.
2.
3.
www.honeywell.com/security
Do NOT connect the USB cable to the panel until
Note
Honeywell recommends Chrome™ for the best performance.
Register and log-in to mywebtech.honeywell.com. Click Download Center > Access
Control > NetAXS > "NetAXS-123 Resources and USB Driver Media CD." Click on
download link. Accept the license agreement and then download it.
Locate and open the compressed ZIP file. Click on the Driver folder. Double-click on
NetAXS-USB-setup.exe file to launch. Select Run and select Yes to allow the USB
Driver to be installed.
Click Next to display the Ready to Install the Program screen.
Note
If confirmation dialog boxes pop up before or during the installation, click the
appropriate boxes to allow or approve the installation.