Setting Up An Ethernet Port - Honeywell NetAXS-123 User Manual

8 |
NetAXS-123 Access Control Unit User's Guide

Setting Up an Ethernet Port

There are two options for connecting the panel to a PC via a web server:
•
•
To set up an Ethernet Port
1.
2.
www.honeywell.com/security
Using a hub/LAN connection
Using a direct connection
Connect your computer's Ethernet port to the panel's Ethernet port using one of the
following two methods:
a. Ethernet Hub connection: Connect both the computer's Ethernet port and the
panel's Ethernet port to an Ethernet hub with standard Ethernet patch cables.
Ethernet
Cable
Ethernet Hub Ethernet Hub
b. Web server direct connection: Connect the computer's Ethernet port directly to
the panel's Ethernet port with either a crossover or an Ethernet cable.
Terminal
Configure the computer's network connection:
a. Select Start > Settings > Control Panel.
b. Click Network and Dial-up Connections.
Terminal
Ethernet Port
Ethernet Port
NetAXS-123 Panel
(Controller Board with
1-Door I/O Board mounted on top)
NetAXS-123 Panel
Ethernet Port (Controller Board with
1-Door I/O Board mounted on top)
Ethernet
Cable
NO
LEDs
LED LED
NO
LEDs
LED LED