Basic Settings; Overview - Honeywell MPA1 User Manual

Basic Settings

Overview

This chapter explains the MPA1 configuration functions as accessed via the web server.
These functions should be performed only by the system administrator or service
personnel.
CAUTION: The sequence of MPA1 configuration tasks is
critical. If you do not follow the sequence described in
Table 2-1
, the system cannot be successfully configured
Table 2-1 Configuration Task Sequence
To...
Configure the System
via EVL (Ethernet
Virtual Loop)
Initial panel setup
Configuring schedules
Configuring spaces
Configuring people and
cards
Configuring access
groups
Note Screen captures taken on a Windows 7 platform. If you use another OS, then
the GUI might be different.
Go here...
Configuring the EVL (Ethernet Virtual Group) on page 18
Initial Panel Setup on page 27
Configuring Schedules on page 34
Configuring Spaces on page 38
Configuring People and Cards on page 66
Configuring Access Groups on page 73
Document 800-26311_ A - April 2020
| 17
2
.