Honeywell NetAXS-123 User Manual page 20

18 |
NetAXS-123 Access Control Unit User's Guide
3.
4.
5.
www.honeywell.com/security
Figure 2-2 Selecting Host/Loop Communication Tab
Set up Communication attributes (see
a. Select Web as Host Connection Type.
b. Select Ethernet Virtual Loop as Mode.
c. Click Save. The panel automatically reboots.
Log into the NetAXS-123 panel.
See Setting Up an Ethernet Port on page
Set up Network Configuration (see
a. Navigate to the Network field on the Settings tab.
b. Select DHCP or enter Static IP address assigned to Primary panel.
c. Click Save. The panel automatically reboots.
Figure 2-2):
8.
Figure 2-3):