Monitoring Outputs - Honeywell NetAXS-123 User Manual

80 |
NetAXS-123 Access Control Unit User's Guide
Shunting/Unshunting an Input
Shunt an input to manually override a schedule setting.
1.
2.
Restoring the Schedule
1.
2.

Monitoring Outputs

An output is a device that changes state when it is energized, pulsed, or time-zone
controlled. For example, a successful card read at a reader pulses a door lock. The lock
changes its normally locked state to an unlocked state and the cardholder opens the door.
The panel supports one door output for each of its three doors. The panel also supports up
to three additional auxiliary outputs. For example:
•
•
•
Configuring Outputs
Before you can monitor outputs, they must first be configured. Outputs can be configured
individually as discrete outputs (see
collectively as a group of outputs.
www.honeywell.com/security
Figure 3-3 Device Management Window - Auxiliary Connections - Inputs
Click either the Shunt or Unshunt button.
Click OK.
Click Restore to Schedule to restore the input to its shunt state based on its current
schedule. A window appears to confirm the action.
Click OK.
1 Door System = 1 Door Output and 1 Aux Output
2 Door System = 2 Door Outputs and 2 Aux Outputs
3 Door System = 3 Door Outputs and 3 Aux Outputs
Note The Pulse and Restore to Schedule buttons only function when an output or a
group has a valid pulse time or a schedule assigned.
Configuring Panel I/O and Groups on page 51) or