Honeywell NetAXS-123 User Manual page 69

5. Optional: Enter a note, such as Department number, phone extension, or a birthday,
for example. Notes can be up to 20 characters.
6. Turn Trace on or off.
Trace provides a record of the card holder's path through the facility by sending an
alarm message to the alarm monitor whenever a card with trace enabled is presented
at a reader.
7. Select a type of Usage.
• If you select Temporary, then you must select an end date on the calendar.
• If you select Limited, then you must select the maximum number of times the
card can be swiped.
8. Select an Access Type: Employee, Supervisor, or VIP. See
Functionality on page 123
9. Click Save.
TIP! You can assign attributes from an existing set of cards. At the bottom of the People
& Cards window, click Add to open a list of available cards, then select a card to assign to
this person.
Modifying a Person
1. Click the box next to the person's name.
Figure 2-38 Modifying a Person
2. Make changes to the person, then click Save.
Deleting a Person
1. Click the box next to the person's name. A delete icon appears
for more about Access Types.
| 67
User Access Types and
.
800-05168V5 - A - 02/2018