Monitoring Output Group - Honeywell NetAXS-123 User Manual

On the Outputs tab, you can do the following:
•
•
•
•
•
Navigating to the Auxiliary Connections-Outputs tab:
Click
Outputs.
Field
Energized
De-energized
Pulse
Restore to Time Zone

Monitoring Output Group

Configuring Output Groups
Before you can monitor output groups, they must first be configured. See
Panel I/O and Groups on page
View the current status of each output in the Discrete tab (Energized or
De-energized).
View the current status of each group of outputs in the Groups tab.
Energize or de-energize any output or group indefinitely.
Pulse any output or group. This energizes the output or group for a configured period
of time (see Monitoring Outputs on page
Restore the output to its configured schedule. A schedule is a specified time period
during which the output will be energized. (see
to open the menu, then click Device Management > Auxiliary Connections >
Figure 3-4 Device Management Window - Auxiliary Connections - Outputs
Note The Output Status screen dynamically refreshes when the output status
changes.
Table 3-3 Output Management Settings
Description
Click to energize an output for an indefinite period of time.
Click to de-energize an output for an indefinite period of time
Click to pulse an output for the configured period of time.
Click to reset the output to follow its configured time zone.
80).
Entering a Panel Name on page
51), and select Group when configuring the output.
| 81
29).
Configuring
800-05168V5 - A - 02/2018