Table of Contents
Advertisement
SEWING THE STITCHES
Memo
• A wing needle can be used for Hemstitching
(3).
Basting
a
Select
and attach presser foot "J".
b
Keep pressing the "Reverse Stitch" button
or the "Reinforcement Stitch" button to
sew 4 stitches of reinforcement stitches,
then press "Start/Stop" button to continue
sewing.
Memo
• When you use the basting stitch for
gathering, do not use a reinforcement stitch
at the beginning; you should lift the presser
foot, rotate the handwheel toward you
(counterclockwise), pull up the bobbin
thread and pull a length of top and bobbin
thread out from the rear of the machine.
• Stitching will be sewn with a length of 5 mm
(approx. 3/16 inch).
a 5 mm (approx. 3/16 inch)
c
Sew while keeping the fabric straight.
d
End the basting with reinforcement stitches.
■ Free-Motion Basting
When the feed dogs are lowered, basting can be
sewn while freely moving the fabric.
140
a
Press
.
The presser foot is raised to the height necessary for
free-motion sewing, and the feed dogs are lowered.
b
Keep pressing the "Reverse Stitch" button
or the "Reinforcement Stitch" button to
sew 4 stitches of reinforcement stitches,
then press "Start/Stop" button to continue
sewing.
c
Press the "Start/Stop" button to start
sewing.
Sew while moving the fabric when the needle is
raised.
Memo
• If the side pedal of the multi-function foot
controller (sold separately) is set to "Single
Stitch", basting can be sewn by using the
side pedal to sew each single stitch. For
details on specifying settings for the multi-
function foot controller, refer to "Specifying
the Multi-Function Foot Controller (Sold
Separately)" on page 34.
• The green light on the right of the
"Reinforcement Stitch" button lights up
while reinforcement or reverse stitching.
• The sewing speed is limited up to 100 spm.
d
End the basting with reinforcement stitches.
Advertisement
Table of Contents
