Table of Contents
Advertisement
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS
Needle and Presser Foot Section
a
c
a Presser foot holder screw
Use the presser foot holder screw to hold the presser foot in
place. (page 73)
b Presser foot holder
The presser foot is attached to the presser foot holder.
(page 72)
c Presser foot
The presser foot consistently applies pressure to the fabric as
sewing takes place. Attach the appropriate presser foot for the
selected stitch. (page 72)
d Feed dogs
The feed dogs feed the fabric in the sewing direction.
e Bobbin cover
Open the bobbin cover to set the bobbin. (page 58, 117)
f Needle plate
The needle plate is marked with guides to help sew straight
seams. (page 110)
Remove the needle plate to clean the race. (page 111, 198)
g Needle bar thread guide
Pass the upper thread through the needle bar thread guide.
(page 61)
h Needle clamp screw
Use the needle clamp screw to hold the needle in place.
(page 73)
14
Measurements on the needle plate and the bobbin
cover (with mark)
h
The measurements on the bobbin cover and
needle plate are references for stitch patterns with
g
a left or middle (center) needle position.
f
e
a For stitches with a middle (center) needle position
b For stitches with a left needle position
c Left needle position on the needle plate <inch>
d Left needle position on the needle plate <cm>
e Middle (center) needle position on the bobbin cover
(with mark) <inch>
f Middle (center) needle position on the needle plate
<inch>
c
e
f
a
Advertisement
Table of Contents
