Download  Print this page

Upgrading Your Machine's Software; Upgrade Procedure Using Usb Media - Brother 882-W30 Operation Manuals

Embroidery and sewing machine.
Hide thumbs

Advertisement

UPGRADING YOUR MACHINE'S SOFTWARE

You can use USB media to upgrade software for your machine.
When an upgrade program is available on " http://s.brother/cpdab/ ", please download the files following
the instructions on the website and steps below.
Note
• When using USB media to upgrade the software, check that no data other than the upgrade file is
saved on the USB media being used before starting to upgrade.
• Compatible operating systems:
Windows 7, Windows 8.1, Windows 10
Upgrade Procedure Using USB
Media
a
While pressing the "Automatic Threading"
button, turn the main power to ON.
 The following screen will appear on the LCD.
b
Press
or
c
Insert the USB media into the USB port
corresponding to the button pressed in step
b
. USB port on the machine. The media
device should only contain the upgrade file.
a
a USB media
b USB port
Note
• The access lamp will begin blinking after
inserting USB media, and it will take about 5
to 6 seconds to recognize the media. (Time
will differ depending on the USB media).
.
UPGRADING YOUR MACHINE'S SOFTWARE
d
Press
.
 The upgrade file is loaded.
Note
• If an error occurs, a red text error message
will appear. When the installation is
performed successfully, following message
will appear.
e
Remove the USB media, and turn the
machine off and on again.
6
217

Advertisement

Table of Contents

   Also See for Brother 882-W30

   Related Manuals for Brother 882-W30

Comments to this Manuals

Symbols: 0
Latest comments: