Table of Contents
Advertisement
LCD SCREEN
2. After removing the needle and the presser
foot, affix white sticker on needle dropping
point area.
a White sticker
3. Insert the needle (standard size 75/11 or 90/
14).
Note
• Use a new sticker. The camera needle
position cannot be set correctly if there is a
hole in sticker or if it is dirty. If you have no
new stickers, contact your nearest
authorized Brother dealer.
4. Press
process. For safety please make sure area
around needle is clear prior to pressing
.
Setting the needle drop point begins.
f
The operation is finished when "OK"
appears. If "NG" appears, affix a new white
sticker, and then press
attempts to set the position are not
successful, contact your nearest authorized
Brother dealer.
38
to initiate the calibration
. If multiple
*
Press
to memorize the calibration data.
*
Press
to back to original screen without
memorizing the calibration data.
g
Remove the sticker.
Advertisement
Table of Contents
