Table of Contents
Advertisement
DESIGNING A STITCH
DESIGNING A STITCH
By using the MY CUSTOM STITCH function, you
can register stitches you have created yourself.
You can also sew designs combining MY
CUSTOM STITCH creations with built-in
characters (page 172).
Memo
• Stitches that you create with MY CUSTOM
STITCH can be a maximum of 7 mm
(approx. 9/32 inch) wide and 37 mm
(approx. 1-1/3 inches) long.
• Stitches can be designed more easily with
MY CUSTOM STITCH if you first draw the
stitch on the included grid sheet.
a
Draw the stitch design on the grid sheet
(part code SA507, GS3:X81277-151).
Memo
• Simplify the design so that it can be sewn
as a continuous line. For a more attractive
stitch, close the design by intersecting lines.
If the design is to be repeated and linked,
the start point and end point of the design
should be at the same height.
186
b
Decide the spacing of the stitch.
*
By adjusting the spacing of a stitch, you can create
various stitch patterns with one stitch.
c
Place points where the stitch pattern
intersects with the grid, and connect all the
points with a line.
d
Determine the x and y coordinates of each
of the marked points.
Memo
• This will determine the stitch design that will
be sewn.
Advertisement
Table of Contents
