Table of Contents
Advertisement
SEWING THE STITCHES
c
Select a stitch for top stitching.
d
Place the fabric right side up in the
machine, and center the presser foot over
the seam when sewing.
a Right side of fabric
Smocking Stitches
Use smocking stitches for decorative sewing on
clothes, etc.
a
Select a straight stitch and attach presser
foot "J".
b
Set the stitch length to 4.0 mm (approx. 5/
32 inch) and loosen the upper thread
tension to approximately 2.0 ("Setting the
Stitch Length" on page 86 and "Setting the
Thread Tension" on page 87).
c
Pull the bobbin and upper threads out by 50
mm (approx. 2 inches).
d
Sew the seams, leaving approximately 10
mm (approx. 3/8 inch) between the seams,
then trim excess thread, leaving 50 mm
(approx. 2 inches).
a Approximately 10 mm (approx. 3/8 inch)
136
e
Pull the bobbin threads to obtain the
desired amount of gather, and then smooth
the gathers by ironing them.
f
Select
or
.
Memo
• For details on each stitch, refer to "STITCH
SETTING CHART" on page 218.
g
Sew the spaces between the straight seams.
h
Pull out the straight stitch threads.
Advertisement
Table of Contents
