Table of Contents
Advertisement
No.
Display
Key Name
a
Image key
b
Projector key
c
Guideline marker key Press this key to display or set the guideline marker for the sewing line. The
d
Stitch pattern editing
key
e
Free motion mode
key
f
Back to beginning key When sewing is stopped, press this key to return to the beginning of the stitch
g
Single/Repeat sewing
key
h
Horizontal mirror
image key
i
Vertical mirror image
key
j
Needle mode
selection key (single/
double)
k
Delete key
l
Elongation key
m
Step effect key
n
Memory key
o
Thread tension key
p
"L/R Shift" key
q
Stitch width and
stitch length key
r
Automatic
reinforcement stitch
key
s
Automatic thread
cutting key
t
Needle position
setting key
u
Pivot key
Press this key to display an enlarged image of the selected stitch pattern.
Press this key to use projector functions.
guideline marker makes quilt piecing or aligning stitching on the fabric edge
easier.
Press this key to display editing function keys on the screen.
Press this key to enter free motion sewing mode.
The feed dog is lowered and presser foot is raised to a height appropriate for
free motion quilting.
pattern.
Press this key to choose single stitches or continuous stitches.
After selecting the stitch pattern, use this key to create a horizontal mirror
image of the stitch pattern.
After selecting the stitch pattern, use this key to create a vertical mirror image
of the stitch pattern.
Press this key to select twin needle sewing mode. The sewing mode changes
between single needle mode and twin needle mode each time you press the
key. If the key display is light gray, the selected stitch pattern cannot be sewn
in the twin needle mode.
When you make a mistake selecting a stitch pattern, use this key to delete the
mistake. When you make a mistake in combining stitch patterns, use this key
to delete stitch patterns.
When 7mm satin stitch patterns are selected, press this key to choose from 5
automatic length settings, without changing the stitch zigzag width or stitch
length settings.
Press this key to make step stitch patterns.
Use this key to save stitch pattern combinations.
Shows the automatic thread tension setting of the currently selected stitch
pattern. You can use
and
Press
to shift the stitch pattern to the right or press
stitch pattern to the left. This feature is not available on all stitch patterns.
Only those applicable will be shifted. The machine default setting is
highlighted.
Shows the stitch width and stitch pattern length of the selected stitch pattern.
The machine default settings are highlighted.
Press this key to use the automatic reinforcement stitching (reverse stitching)
setting. If you select this setting before sewing, the machine will automatically
sew reinforcement stitches at the beginning and end of sewing (depending on
the stitch pattern, the machine may sew reverse stitches).
Press this key to set the automatic thread cutting function. Set the automatic
thread cutting function before sewing to have the machine automatically sew
reinforcement stitches at the beginning and end of sewing (depending on the
stitch pattern, the machine may sew reverse stitches) and trim the threads
after sewing.
Press this key to select the needle stop position to be up or down. You can
also check the needle mode setting (single or twin).
Single needle/down position
Single needle/up position
Twin needle/down position
Twin needle/up position
Press this key to select the pivot function. When the pivot function is selected,
stopping the machine lowers the needle and slightly raises the presser foot
automatically. In addition, when sewing is restarted, the presser foot is
automatically lowered.
EDITING STITCH PATTERNS
Explanation
to change the thread tension settings.
Page
171
96
98
103
126
170
169
169
169
4
64
161
169
175
179
87
86
to shift the
85, 86
79
88
64, 89
89
167
Advertisement
Table of Contents
