Alarm Sounds - Brother 882-W30 Operation Manuals

This message is displayed
when a button, such as the
"Start/Stop" button, is
pushed while the presser
foot is raised.
This message is displayed
when it seems that the
upper thread has not been
threaded correctly.
This message is displayed
when the file size exceeds
the data capacity of the
machine.
Confirm the file size and
format. (page 36.)
This message appears if
the file format is
incompatible with this
machine. Check the list of
compatible file formats.
(page 36.)
This message is displayed
when the image is deleted.
This message is displayed
when you press
in the
screen other than the utility
stitch, or press
in the
screen other than the utility
stitch or character/
decorative stitch.
This message appears
when you try to start
sewing utility stitches or
character/decorative
stitches with the
embroidery foot with the
LED pointer attached to the
machine.
Remove the embroidery
foot with the LED pointer
before entering the sewing
mode.

■ Alarm Sounds

If the operation was performed incorrectly, an alarm
sounds to indicate that an error occurred. If the
operation was performed correctly, the machine
beeps to confirm the operation.
Memo
• To cancel the operation beep or to change
the volume, press
General settings screen, and then change
the setting for "Machine Speaker Volume".
Refer to page 30 for more details.
ERROR MESSAGES
This message appears
when the dual feed foot
cannot be used with the
current stitch. Select other
stitch.
This message appears
when start sewing
buttonhole stitches without
attaching buttonhole foot
"A+".
, display page 4 of the
215
6