Table of Contents
Advertisement
d
Hold the dual feed foot in place with your
right hand, then using the included
screwdriver securely tighten the large
screw.
CAUTION
• Use the included screwdriver to firmly tighten
the screw. If the screw is loose, the needle may
strike the presser foot and possibly cause
injury.
e
Plug the connector of the dual feed foot
into the jack on the back of your machine.
f
Press
to unlock all keys and buttons.
All keys and operation buttons are unlocked, and
the previous screen is displayed.
CHANGING THE PRESSER FOOT
■ Attaching/Detaching toe
Attach the toe by aligning the pins with the notches
and snap it into place.
a Pins
b Notches
If you push down on the front and back part of the
dual feed foot, the toe of the dual feed foot will snap
off.
2
75
Advertisement
Table of Contents
