Mib Support - RuggedCom RuggedRouter RX1000 User Manual

RuggedRouter User Guide
The SNMP V3 Trap Destinations part of the menu allows the creation and deletion
of V3 trap destinations.
The Type field specifies the exchange used with this destination, either V3 trap or V3
inform.
The IP address and Trap Community fields specifies the receivers IP address and
user name.
The Engine ID parameter is necessary for inform type notification destinations only,
and must be configured by the trap receiver in order to receive these notifications.
The Minimum Security, Authentication Protocol, Authentication Passphrase,
Privacy Protocol and Privacy Passphrase fields are as described above.

MIB Support

The RuggedRouter supports the following MIBs.
MIB Name
IF-MIB
SNMPv2-MIB
TCP-MIB
IP-MIB
UDP-MIB
SNMP-VIEW-BASED-ACM-MIB View-based Access Control Model for SNMP.
SNMP-FRAMEWORK-MIB
SNMP-MPD-MIB
SNMP-USER-BASED-SM-MIB
252
MIB Description
The MIB module to describe generic objects for network
interface sub-layers.
The MIB module for SNMPv2 entities.
The MIB module for managing TCP implementations.
The MIB module for managing IP and ICMP
implementations.
The MIB module for managing UDP implementations.
The SNMP Management Architecture MIB.
The MIB for Message Processing and Dispatching.
The management information definitions for the SNMP
User-based Security Model.
RuggedCom