Ntp Server Main Menu; Generic Options; Figure 176: Ntp Server; Figure 177: Ntp Generic Options - RuggedCom RuggedRouter RX1000 User Manual

RuggedRouter User Guide

NTP Server Main Menu

Figure 176: NTP Server

Note that the NTP server is disabled by default and may be enabled via the System
folder, Bootup And Shutdown menu. When enabled, any configuration changes may
be made to take effect by selecting the Restart ntpd daemon button. The View GPS
Status and View GPS log sub-menus appear if the router is equipped with a
Precision Time Protocol card.

Generic Options

Figure 177: NTP Generic Options

Set the Broadcast Client option to "Yes" if you wish to act on NTP broadcast
messages.
The default multicast address used for NTP is 224.0.1.1. Select a custom multicast
address with the Custom address field if you wish to use a different addresses.
214 RuggedCom