Chapter 26 - Maintaining The Router; Introduction; Alert System; Alert Menu - RuggedCom RuggedRouter RX1000 User Manual

Chapter 26 – Maintaining The Router

Introduction

This chapter familiarizes the user with:
Viewing Alerts
Configuring and monitoring the Gauntlet Security Appliance
Backing up and restoring configurations
Configuring SNMP
Configuring Radius Authentication
Configuring Outgoing Mail
Using System Logs
Upgrading Software
Using Pre-upgrade/Post-upgrade scripts
Uploading and downloading files

Alert System

The alert system provides the following features:
●
●
●
●
Each alert is mapped to an alert definition entry, which is predefined by a daemon
who owns the alert or by a user. All alert definition entries are configurable by user.
An alert filter is a user defined configuration to define the forwarders destination of
active alerts. Any active alerts with Renotify Interval set to non-zero value and
matches with the filter level will be forwarded to the defined forwarder destination.

Alert Menu

Figure 201: Alert Main Menu

RuggedCom
Generates alerts, displaying them locally and/or forward them via
email messages.
Alerts are set and cleared by the daemons that own them. Active
alerts are locally displayed and can be cleared manually.
Multiple forwarders can be configured, a configurable filter level
controls alert forwarding to each forwarder.
By configuring different forwarders, low severity and high severity control
centers can be set up.
Chapter 26 – Maintaining The Router
235