Technical Support - RuggedCom RuggedSwitch RS900G Installation Manual

10-port managed ethernet switch with gigabit uplink ports

Hide thumbs Also See for RuggedSwitch RS900G:

Installation manual (18 pages)

Hardware installation manual (23 pages)

Table Of Contents

Table of Contents

Dissemination or reproduction of this document, or evaluation and communication of its contents, is

not authorized except where expressly permitted. Violations are liable for damages. All rights

reserved, particularly for the purposes of patent application or trademark registration.

This document contains proprietary information, which is protected by copyright. All rights are

reserved. No part of this document may be photocopied, reproduced or translated to another

language without the prior written consent of RuggedCom Inc.

Disclaimer of liability

We have checked the contents of this manual against the hardware and software described.

However, deviations from the description cannot be completely ruled out.

RuggedCom shall not be liable for any errors or omissions contained herein or for consequential

damages in connection with the furnishing, performance, or use of this material.

The information given in this document is reviewed regularly and any necessary corrections will be

included in subsequent editions. We appreciate any suggested improvements. We reserve the right

to make technical improvements without notice.

Registered Trademarks

RuggedSwitch

and ROS

eRSTP are trademarks of RuggedCom Inc. Ethernet is a trademark of Xerox Corporation. Other

designations in this manual might be trademarks whose use by third parties for their own purposes

would infringe the rights of the owner.

Corporate Headquarters

RuggedCom Inc.

300 Applewood Crescent

Concord, Ontario

Canada, L4K 5C7

Tel:

+1 905 856 5288

Fax:

+1 905 856 1995

Toll-free: 1 888 264 0006