RuggedCom RuggedRouter RX1000 User Manual page 223

The Only allow users field specifies the users allowed to connect by SSH. The
specification can be a list of user name patterns, separated by spaces. Login is
allowed only for user names that match one of the patterns. '*' and '?' can be used as
wild cards in the patterns. Only user names are valid, a numerical user ID is not
recognized. By default, login is allowed for all users. If the pattern takes the form
USER@HOST then USER and HOST are separately checked, restricting logins to
particular users from particular hosts.
The account selector (
The Only allow members of groups field specifies the "group" (in the Unix sense)
of users allowed to connect by SSH. The specification can be followed by a list of
group name patterns, separated by spaces. If specified, login is allowed only for users
whose primary group or supplementary group list matches one of the patterns. '*' and
'?' can be used as wild cards in the patterns. Only group names are valid, a numerical
group ID is not recognized. By default, login is allowed for all groups.
The account selector (
The Deny users and Deny members of groups fields specify users and groups to
deny connections to.
RuggedCom
) button can be user to build up a list of allowable users.
) button can be user to build up a list of allowable groups.
Chapter 23 – Configuring SSH
221