Technical Info; Appliance Information; Efficiency Information; Ventilation Requirements - Vision V1/200/A Installation & User's Instructions

Inset coal effect gas convector fire
Table of Contents

Advertisement

APPLIANCE INFORMATION

This appliance should be used with Natural Gas (G20) only.
Model:
Gas Type
Maximum Gross Input
Minimum Gross Input
Inlet Pressure
Gas Connection
Ignition
Burner Injector
Pilot Type
NOx Classification
EFFICIENCY
The efficiency of this appliance has been measured as specified in BS 7977-1 and the result is
56.9% Gross Efficiency.
The gross calorific value of the fuel has been used for this efficiency calculation. The test data
from which it has been calculated has been certified by B.S.I. The efficiency value may be used in
the UK Government's Standard Assessment Procedure (SAP) for the energy rating of Dwellings.

VENTILATION REQUIREMENTS

In the UK, purpose made ventilation is not normally required for this appliance except in new
build houses. However, if spillage is detected during commissioning of the appliance, this may
mean there is insufficient ventilation. Additional ventilation may then be required. Please refer to
any national ventilation requirements in this instance.
In the ROI, it will be necessary to refer to I.S. 813 issued by the National Standards Authority of
Ireland.
Any air vent must not be restricted.
TECHNICAL INFORMATION
V1/200/A - manual control
V1/200/B - slide control
G20 natural gas
6.0kW (20,450 Btu/h)
3.7kW (12,600 Btu/h) - manual control
2.9kW (9,900 Btu/h) - slide control
20mbar ±1.5mbar
8mm pipe
Piezo Electric - manual control
Battery Spark - slide control
Cat 82—069
Seagas P432D
5
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

V1/200/b

Table of Contents