Vision V2/100/A Installation & User's Instructions

Remote control decorative electric fire

V2/100/A

Model Number:

(remote control)

DECORATIVE ELECTRIC FIRE

INSTALLATION & USER INSTRUCTIONS

GB IE

IMPORTANT INFORMATION INSIDE. PLEASE READ BEFORE USE

These instructions must be left with the appliance for

future reference and maintenance information.

VISION FIRES

IMPERIAL POINT, EXPRESS TRADING ESTATE, STONEHILL ROAD,

FARNWORTH, BOLTON. BL4 9TN.

V2/100 Rev.1 (Feb 2012)

VISION FIRES

Table of Contents

Need help?

Do you have a question about the V2/100/A and is the answer not in the manual?

Page 1 V2/100/A Model Number: (remote control) DECORATIVE ELECTRIC FIRE INSTALLATION & USER INSTRUCTIONS GB IE IMPORTANT INFORMATION INSIDE. PLEASE READ BEFORE USE These instructions must be left with the appliance for future reference and maintenance information. VISION FIRES IMPERIAL POINT, EXPRESS TRADING ESTATE, STONEHILL ROAD, FARNWORTH, BOLTON.
Page 2 IMPORTANT INFORMATION TECHNICAL SPECIFICATIONS MODEL: V2/100/A VOLTAGE: 220-240 FREQUENCY: 50Hz POWER: 2000W LAMP: 1 X MAX. 3W DIMENSIONS: OVERALL INSERT WIDTH HEIGHT DEPTH FIREPLACE OPENING SIZE: MINIMUM MAXIMUM WIDTH HEIGHT DEPTH GENERAL NOTES  Before installation, fully read these instructions and follow all directions.
Page 3 INSTALLATION STEP 1 Determine the type of decorative frame or fascia that will be fitted to the appliance. If it’s a separate steel, 3 sided trim and cast iron fret, move directly to step 2. If it’s a one piece cast iron frame (with removable ash pan cover), then the appliance canopy will need to be removed.
Page 4 OPERATING INSTRUCTIONS The appliance can be operated manually using the rocker switch to the left of the heat outlet, or by remote control. To operate, first press the left master switch (located to the left of the heater under the canopy) to the ‘I’...