Page 1
PREMIUM ELECTRIC FIRES INSTALLER INSTRUCTION MANUAL AND USER GUIDE FOR ELECTRIC FIRE MODELS: VS75 - VS100 - VS1 30 - VS150 - VS180 - VS220 PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION AND OPERATION. KEEP THEM IN A SAFE PLACE FOR FUTURE REFERENCE. REV E 01/23...
Page 2
IMPORTANT INFORMATION – AMBIENT LIGHT KIT This appliance can be used with an LED mood lighting kit approved by Vision Fires FIG. 1a – The Solus Ambient Light Kit (available from your retailer). Other, non-approved LED light kits must not be used as they may damage the appliance and invalidate the warranty.
Page 3
IMPORTANT INFORMATION Before installation, check that all parts included are undamaged. If the appliance is damaged, check with the supplier before installation and operation. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Page 4
IMPORTANT INFORMATION CAUTION: Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present. Children of less than 3 years should be kept away from the products unless continuous supervised.
TECHNICAL INFORMATION VS75 VS100 VS130 VS150 VS180 VS220 See outer packaging. See outer packaging. See outer packaging. See outer packaging. See outer packaging. See outer packaging. Weight (kg) Dimensions (mm) H848xW780xD296 H548xW1030xD296 H548xW1330xD296 H548xW1530xD296 H548xW1830xD296 H548xW2230xD296 Supply Voltage 230-240V AC/50Hz 230-240V AC/50Hz 230-240V AC/50Hz 230-240V AC/50Hz...
Page 6
TECHNICAL INFORMATION VS75 VS100 1030 1000...
Page 7
TECHNICAL INFORMATION VS130 1330 1300 VS150 1530 1500...
Page 8
TECHNICAL INFORMATION VS180 1830 1800 VS220 2230 2200...
Page 9
CONTENTS LIST PART DESCRIPTION AND QUANTITY PART DESCRIPTION AND QUANTITY SIDE GLASS TRIM (TOP/BOTTOM) X 4 SHELF SUPPORT BRACKET (SHORT) X 2 SIDE GLASS TRIM (SIDE) X 2 ORANGE GLASS SUCKER X 2 (NOT SHOWN) METAL SIDE PANEL X 2 MAGNET TOOL X 1 (NOT SHOWN) SIDE GLASS PANEL X 2...
INSTALLATION Before installation, check that all parts are included and undamaged. If the appliance is damaged, check with the supplier before installation and operation. If the mains power supply lead is damaged in any way, it must be replaced by a suitable equivalent approved by the manufacturer. The main box contains the appliance, 2 x suction cups and 1 x magnet tool.
Page 11
INSTALLATION ASPECT TYPE FIG. 5 The appliance can be installed in three different aspects: • Front (1 glass panel) • Corner (2 glass panels) • Panoramic (3 glass panels) Front Aspect Your appliance will arrive in a front aspect with metal side panels already fitted –...
INSTALLATION The manufacturer does not accept any liability for any injuries or damages that may occur due to improper handling or installation. Ensure that the wall upon which the appliance is to be installed and any wall fixings used are sufficiently strong enough to hold the weight of the appliance (appliance weight can be found printed on the packaging).
Page 13
INSTALLATION - FINISHING MAGNETIC SIDE DECORATIVE PANELS FIG. 14 The appliance is supplied with 2 magnetic panels that can be fitted when installing in a panoramic or corner aspect. These panels are simply positioned against the side of the appliance, behind the side glass edge trim – see Fig.
OPERATION The appliance can be operated conveniently in 3 different ways: manually, via the remote control handset or via the dedicated iOS/Android app. MANUAL CONTROL FIG. 17 Preset Mode Heat Mode Standby Wifi On/Off On/Off Each time a button is pressed on the appliance or on the remote control an audible beep is emitted. To turn off this feature hold your finger on the Preset Mode button (on the appliance) for 3 Seconds.
OPERATION REMOTE CONTROL Ensure that 2 AAA batteries are inserted into the remote FIG. 18 control handset. The battery power level is indicated by the column of bars to the right side of the temperature display when the appliance is in standby mode. 5 bars indicates the batteries are full, 1 bar indicates the batteries are empty and need to be replaced immediately.
Page 16
OPERATION Button 5: Flame Colour Repeatedly press to cycle through flame colour menu. Whilst in the flame colour menu, press the plus and minus buttons to increase and decrease the flame brightness - 1 bar is the dimmest setting, 5 bars is the brightest setting. On screen FL.0 = Flame off On screen FL.1 = Red On screen FL.2 = Orange...
CLEANING & MAINTENANCE IMPORTANT: ALWAYS DISCONNECT THE APPLIANCE FROM THE POWER SUPPLY AND ALLOW TO COOL BEFORE CLEANING. Any repairs or maintenance should only be carried out by a suitably qualified competent person. The appliance should be occasionally cleaned using a dry cloth. Do not use detergents, abrasive cleaners of furniture polish.
WARRANTY Vision E-Line Solus appliances come with a standard 1-year warranty (parts & labour) when purchased through an authorised dealer. This can be extended for free to two years (parts only for year 2) by registering your appliance within 60 days of purchase.
Page 20
Electrical appliances should not be disposed as household waste. Separate collection facilities should be used in the disposal of electrical appliances. Contact your local government for information about the available collection systems. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.
Page 22
PREMIUM ELECTRIC FIRES CONNECT YOUR VISION E-LINE SOLUS ELECTRIC FIRE WITH THE TUYA APP FOR ELECTRIC FIRE MODELS: VS75 - VS100 - VS130 - VS150 - VS180...
CONNECTION GUIDE Getting Started To connect your Fire to the Vision E‐Line Solus app you will need the following A device running android or ios such as a tablet or smart phone Network within range of the fire Valid email address, which you are able to access for verification STEP 1 – DOWNLOAD THE TUYA SMART APP AND CREATE A USER ACCOUNT Download the Tuya Smart app from your app store Once downloaded the TUYA icon will apear on your device’s home screen, you can now open this app by tapping the icon. Follow the directions in the app to create an account, a valid email address will be required to complete the account set up process. Once your account is set up you will receive a number of permissions please follow the on screen prompts.
Page 24
STEP 2 – CONNECT YOUR APPLIANCE TO THE APP Now you can begin the process of connecting your appliance to the app. At the home screen press the add device button. Once the password has been entered you will be presented with a checklist to ensure trouble free connection of your appliance to the network. You may also be asked to allow location permissions, please read, and follow the on‐ screen information. ...
Page 25
After you have gone through the permissions you will then need to choose which device to pair, please select small home appliances from the menu as shown below: Now from the list of small home appliances select Heater (Wi‐Fi). This will then prompt you to enter your Wi‐Fi password, ensure the correct network is selected enter your Wi‐Fi password then press the next button. ...
Page 26
Now the app will prompt you to reset the device this is referring to placing your fire into pairing mode. Before tapping next you will need to put your appliance into pairing mode. Ensure the fire is switched on before commencing and press and hold the Wi‐Fi button on your fire located on the underside of the top righthand corner of the fire, as shown below until fuel bed flashes red. Flasing Red – In pairing Once the fire is placed in pairing mode with a flashing red fuel bed tap the next button on the app and choose the Blink Quickly button this will then begin to search for the fire, when it has successfully paired the fire fuel bed will display a solid green colour. ...
Page 27
Please note, the fire fuel bed colour indicates the status of the fire when first initiating the pairing the fuel bed will flash red. Once successfully paired the fuel bed will display green. If a flashing blue fuel bed appears check your connection and repeat the pairing procedure. Flasing Red – In pairing Solid Green – Successfully paired Flasing Blue – Failed Pairing STEP 4 – SUCCESSFUL PAIRING On successful pairing you can now use the Vision E‐Line app to control your appliance. Your appliance will now be listed as a device in the Tuya home screen. Select the appliance to begin using the Vision Solus app. To turn the fire on use the power button as highlighted in the illustraion below. ...
Page 28
TROUBLESHOOTING If you have trouble connecting, please check: Ensure your fire is in standby mode Your appliance is in range of the network Your smartphone/tablet is connected to your home network Ensure the latest version of the app is installed on your phone or tablet Check your network has a good signal strength If you are still experiencing issues, please uninstall the app from your device and reinstall then repeat the above steps. Advanced Wi‐Fi Router Guidance Wireless transmissions get weaker as you get further from your wireless router, they can also be disrupted by general building fabrics, such as metal framework, walls & floors. For the best possible connection to your Solus appliance, the location of your wireless router in relation to your appliance is key: If there are certain areas of your home where you find your signal drops, it may be due to a blockage. Large objects can often obstruct or interfere with a wireless connection, so it's best to keep your router off the ground and away from larger items Steer clear from putting your router behind the sofa, inside a cabinet or behind a door ‐ although it looks tidy, if you are experiencing an issue this could be the cause a problem You should also keep electronics such as microwaves, lamps, speakers, TVs and monitors as far away from the router as possible If issues are encountered when trying to connect your appliance, our best advice would be to follow the below: 1.