Table of Contents
Advertisement
USER GUIDE
If the appliance is fitted to a wall without a fire surround then any wall covering must be non com-
bustible. Soft wall coverings such as wallpaper, blown vinyl are easily affected by heat and
shouldn't be used unless a fire surround is fitted.
Do not add extra ceramic pieces to the appliance as this can result in incorrect combustion. If any
of the ceramic components become damaged then the complete ceramic set must be replaced
with genuine manufacturer's parts.
Do not burn paper or other materials on the appliance.
Ensure that furniture and other combustible items are kept well clear of the fire.
Never use aerosols or other flammable products near the fire when its in use.
Always allow sufficient time after use for the fire to cool before cleaning.
Servicing should be carried out a least once a year by a competent person. Failure to do so will
void the appliance warranty. Please read the 'Servicing & Maintenance' section of this manual
for further information.
If after installation, any home improvements are carried out such as installation of double glazing
or extractor fans in adjoining rooms, etc. then a further spillage test should be carried out by a
competent person.
OPERATING PROCEDURE
Manual Control
The control knob is located behind the ash pan cover. Remove the ash pan cover to gain access.
Push the control knob and turn fully anti clockwise to the position marked ignition. Hold the
control knob here until the pilot lights. Hold for a further 10 seconds to allow a stable flame.
Release the control knob and turn anti clockwise to the 'HI' position to ignite the main burner in
maximum heat setting.
Turn the control knob clockwise to the 'LO' position to switch the fire to its minimum setting. The
knob can be rotated between the low and high positions to achieve your desired setting.
Push the control knob and turn clockwise to the 'P' position to extinguish the main burner while
leaving the pilot flame alight.
Push the control knob and turn fully anti clockwise to the 'O' position to extinguish the pilot flame.
The appliance is now turned off.
16
Advertisement
Table of Contents
