Setting Up Film - Royal Sovereign RSS-1050 Owner's Manual

Picture 1
Picture 2
Picture 3
Picture 4
Picture 5
1. Set the glossy side of upper/lower film to face the heat.
( Glossy side is PET film and matte side is thermal polymer laminating film.)
2. Like picture 1, insert core into the left side of upper/lower film shaft.
3. Like picture 2 and 3, insert core into the right side of upper/lower film.
4. Like picture 4 and 5, adhere core closely.
(Make the right/left direction of fixing screw consistent.)
5. Locate film in the middle, and then fasten core fixing screw.

SETTING UP FILM

Upper Film
Lower Film
Upper Film
Lower Film
- 7 -
Core Fixing
Screw