Cold Mode - Royal Sovereign RSS-1050 Owner's Manual

***Check current temperature on the shoes.***
T-CHECK
T-CHECK
SPEED
SPEED
MEMORY
MEMORY
C/HOT
ST/BY
COLD ST/BY
1.This function allows you to check the current
temperature on the shoes.
2.Press then temperature is shown on the
T-CHECK
display while display is blinking.
3.It shows current temperature 5 times then returns
to temperature which the operator has set.
4.It shows "LO" when the temperature is 40°c (104°F)
or below. Only when the current temperature is over
41°c (106°F) will it show the exact temperature on
on the shoes.

***Cold mode***

1.You can do cold lamination with this function.
2.Press the
C/HOT
on the display.
3.Speed will always show 2 and there is no memory
of working condition shown.
4.Speed can be varied 1 or 2 by selecting
5.You release the machine from cold mode by
pressing button.
MEMORY
6.Everytime you press the button, buzzer is ringing
7.ST/BY mode is not working at COLD mode.
- 16 -
button to show "COLD"
button.