Royal Sovereign RSS-1050 Owner's Manual page 15

***Memorizing Working condition and Using
the memorized working condition***
UPPER SPEED
LOWER
MEMORY
*If you change the temperature or speed and the display shows blinking at the same
time, memory number is blinking together, it means that working cocdition is not
set. When you memorize working condition, you have to press
5.When you memorize another working condition, you can do above 3 and 4
operation over.
MEMORY
MEMORY
1) Memorize working condition
1.Operator can memorize 9 working conditions.
2.Each time you press the button, buzzer is ringing.
3.find the condition number you are willing to memorize
working condition by pressing
4.When you finish setting upper/lower temperature and
speed, you can press the memory button.
This working condition is memorized while buzzer is
ringing with blinking.
2) Use the memorized working condition.
1.Operator can choose one of 9 memorized working
conditions.
the
2.Press
MEMORY
a working condition. The display will blink.
3.After the blinking stops, it is set the working condition you
selected and shows the working condition on the display.
- 15 -
button.
MEMORY
button.
MEMORY
or to select