Major Parts Of Machine; Setting Up Film - Royal Sovereign RSL-2702 Owner's Manual

3. INSTALLATION
RS Roll Laminator Line is advanced laminators with time transcendental design,utilizing
the latest in laminating technology. It is designed for you to set temperature and speed as
necessary and have the machine remember your settings. It is also designed for
convenience by anyone through the simple procedure of adjusting film tension in
accordance with the thickness of film and materials to be laminated.

4. MAJOR PARTS OF MACHINE

NO PART NAME
1 UPPER FILM
2 TAKE-UP BOBBIN
3 IDLE BAR
4 HOT ROLLER
5 SAFETY COVER
6 TABLE-FRONT
NO PART NAME
7 LOWER FILM
8 GUIDE-DOCUMENT
9 HANDLE-TENSION
10 PRESSURE LEVER
11 CONTROL PANEL
12 KNOB-TENSION
3

5. SETTING UP FILM

Picture 1
Picture 2
Picture 3
Picture 4
1. As shown in picture 1, insert cores into the upper/lower film shaft.
2. As shown in picture 2 ,using the special tool,fix cores on the film shaft with
set-screws.
3. Set the glossy side of upper/lower film to face the heat.
( Glossy side is PET film and matte side is thermal polymer laminating film)
4. Center film as shown in picture 3 and 4
4
RSL-2702