Setting Up Film - Royal Sovereign RSC-1650C Owner's Manual

주 주 름 름 L 방 방 C 지 지 D 부 부 표 시 창
1. Set the glossy side of upper/lower film to face the heat.
( Glossy side is PET film and matte side is thermal polymer laminating film.)
2. Like picture 1, insert core into the left side of upper/lower film shaft.
3. Like picture 2 and 3, insert core into the right side of upper/lower film.
4. Like picture 4 and 5, adhere core closely.
(Make the right/left direction of fixing screw consistent.)
5. Locate film in the middle, and then fasten core fixing screw.
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500
열 열 판 판

SETTING UP FILM

COLD FILM
PAPER BACK
- 6 -
버 튼 부