Connect Pump Outlet Sediment Pre-Filter - Aquathin PEARL 30 Getting Started

3. Connect the Pump Outlet to the sediment pre-
filter
Measure and cut a length of the
pump to the sediment pre-filter.
Fig. D6: Connect red tubing from pump outlet to sedi-
ment pre-filter inlet
Insert one end of the red
red
the other end of the tubing in the sediment pre-filter inlet.
Fig. D7: Connect pump to pump jack on main frame
55 © 2009-2016 Aquathin Corporation. All rights reserved.
red tubing to connect the
red
tubing into the pump outlet, and