Aquathin PEARL 30 Getting Started page 37

Restarting your System
When all filters have been replaced and all tubes have
been reconnected, hook the unit up to the faucet and turn
on the water. Let the unit produce water for 10–15
minutes then drain the water, invert the unit, and inspect
for leaks. If any water appears at any of the tubing
connections, remove the retaining clip, remove and re-
insert the tubing. Replace the retaining clip. (A leaking
connection is extremely rare.)
You can now return the unit to service. Let the reservoir
fill and discard the first tank of water (use it to water
plants, etc.) You are now ready to again enjoy great
tasting, pure Aquathin RO/DI water for another 12
months!
37 © 2009-2016 Aquathin Corporation. All rights reserved.