Option For Low Source Pressure (Pba-G); Verify The Tubing And The Flow - Aquathin PEARL 30 Getting Started

filter to the ice maker using
the Ice Maker
provided. (See figure on the
right.)
18. Option for Low
Source Pressure
(PBA-G)
I f y o u e x p e r i e n c e
fluctuations in line or low pressure, often associated with
private wells, we recommend that you choose the PEARL
with PBA-G booster pump system which includes a
booster pump and is completely configured at the factory.
(The amount of water stored is a function of line
pressure). To setup and install the optional pump, refer to
instructions in Appendix

VERIFY THE TUBING AND THE FLOW

Tubing and flow depend on whether you chose to use the
pump.
Without pump:
Cold water enters the main assembly through the "TO
FEED" inlet. The water then passes through to the inlet
of the Sediment Pre-filter.
The purified water exits the main assembly from the "TO
TANK" outlet and passes through the tank and the
CARB 6 GAC post-filter before reaching the chrome
faucet.
With pump:
Cold water enters the main assembly through the "TO
FEED" inlet. The water then passes through the pump to
the inlet of the Sediment Pre-filter.
19 © 2009-2016 Aquathin Corporation. All rights reserved.
Tee
Figure 15. Connect the Ice
Maker as shown (color of
tubing is for illustrative
purposes)
D.