Clock Settings - Janome JR3200 series Operation Manual

Before you first use the robot, set up the clock settings.
Once you set up clock settings, the robot can record the date and time of when errors occur.
You can set this with the teaching pendant or PC software (optional).
For setting up clock settings via the teaching pendant, press the MODE key and switch over to the
Administration Mode. From [Administration Settings Mode], select and set up [Clock Settings].
MODE [Administration]
TP
[Robot]
PC
With clock settings, after entering each value for the year, month, day, time, minute, and second, the
information is registered to the robot by selecting [Clock Setup]. If the information is registered correctly,
the screen reverts to the Administration Settings Mode screen.
The error history screen can be viewed by using one of these procedures:
Administration
TP
Teaching Mode
Run Mode
Setup

6. CLOCK SETTINGS

Administration Settings Mode
Start Channel
Change Program Number
COM Settings
Ethernet Settings
Fieldbus Settings
MEMORY Port Settings
Back Light Auto OFF
Clock Settings
Clear Error History
Clear All C&T Data
Reset Teaching Environment Settings
Reset Administration Settings
[Administration Settings Mode]
[Clock Settings]
[Administration] [Clock Settings]
[Error History]
UTILITY
MENU [Error History]
I/O-SYS
[Error History]
39 Desktop Robot JR3000