Common To The Jr3200 Series - Janome JR3200 series Operation Manual

2.1 Common to the JR3200 Series

NOTE
When installing, rotate the rubber feet to adjust the height. Be sure to make them stable.
Example: JR3203N-AC
4 30
-φ
(Rubber Feet)
4-M8
There are four rubber feet (ϕ30).
The values within the brackets above are for reference only.
NOTE
• The robot may rattle depending on the tool mass. If so, be sure to secure the unit. To secure the
unit, remove the rubber feet and use the 4 M8 screw holes used for fastening the rubber feet.
• Have at least 2 people carry the unit when transporting it.
• The unit's mass is 20kg for 3 axis specifications and 22kg for 4 axis specifications.
Setup
(3)
15
210
Desktop Robot JR3000