Interfaces Loopback <Interface> Firewall Local <Ruleset - Brocade Communications Systems 5600 vRouter Configuration Manual

Hide thumbs Also See for 5600 vRouter:
Table of Contents

Advertisement

interfaces loopback <interface> firewall local <ruleset>
Applies a firewall instance, or rule set, to a loopback interface.
Syntax
set interfaces loopback
delete interfaces loopback
show interfaces loopback
Parameters
interface
The name of the dataplane interface.
ruleset
local
Applies the ruleset to forwarded packets on the inbound interface.
Modes
Configuration mode
Configuration Statement
interfaces {
loopback interface {
firewall {
local ruleset
}
}
}
Usage Guidelines
Use this command to apply a firewall instance, or rule set, to an interface.
A firewall has no effect on traffic traversing the system or destined to the system until a firewall rule set has been applied to an
interface or a virtual interface by using this command.
To use the firewall feature, you must define a firewall rule set as a named firewall instance by using
<name>
on page 52. You then apply the firewall instance to interfaces, virtual interfaces, or both by using this command. After
the instance is applied, it acts as a packet filter.
For each interface, you can apply up to three firewall instances: one firewall in instance, one firewall out instance, and one
firewall local instance.
Make sure the firewall instance you apply to an interface is already defined, or you may experience unintended results. If you
apply a firewall instance that does not exist to an interface, an implicit firewall rule of allow all is applied.
Use the set form of this command to apply a firewall instance, or rule set, to an interface.
Use the delete form of this command to delete a firewall instance, or rule set, from an interface.
Use the show form of this command to display the configuration of a firewall instance, or rule set, for an interface.
Brocade 5600 vRouter Firewall Configuration Guide
53-1004253-01
interface firewall local ruleset
interface firewall local ruleset
interface firewall local
Firewall Commands
security firewall name
85

Advertisement

Table of Contents
loading

Table of Contents