Security Firewall Session-Log <Protocol - Brocade Communications Systems 5600 vRouter Configuration Manual

security firewall session-log <protocol>
Specifies the protocol to be used for logging session events.
Syntax
set security firewall session-log { icmp { closed | established | new | timeout } | other | tcp | udp }
delete security firewall session-log [ icmp | other | tcp | udp ]
show security firewall session-log
Command Default
Session logging is disabled.
Parameters
icmp
Enables Internet Control Message Protocol (ICMP) for messaging for the session log.
∙
closed: In a closed state.
∙
established: In an established state.
∙
new: In a new state.
∙
timeout: In a timeout state.
other
To use protocols other than TCP, UDP, or ICMP for session logging.
tcp
To use Transmission Control Protocol (TCP) for session logging.
udp
To use User Datagram Protocol (UDP) for session logging.
Modes
Configuration mode
Configuration Statement
security {
firewall {
session-log {
icmp
other
tcp
udp
}
}
}
Brocade 5600 vRouter Firewall Configuration Guide
53-1004253-01
{
closed
established
new
timeout
}
Firewall Commands
81