Security Firewall Name <Name> Rule <Rule-Number> State <State - Brocade Communications Systems 5600 vRouter Configuration Manual

security firewall name <name> rule <rule-number> state <state>
Defines whether to match packets related to existing connections for the firewall rule set.
Syntax
set security firewall name
delete security firewall name
show security firewall name
Parameters
name
The name of a firewall rule set.
rule-number
The numeric identifier of a rule. The identifier ranges from 1 through 9999.
state
Matches or fails to match related packets, depending on the value of
existing connections.
Values for
enable: Matches related flows.
disable: Does not match related flows.
Modes
Configuration mode
Configuration Statement
security {
firewall {
name name {
rule rule-number {
}
}
}
}
Usage Guidelines
Use the set form of this command to enable or disable the state for the firewall rule.
Use the delete form of this command to delete the state of a firewall rule.
Use the show form of this command to display the state of a firewall rule.
Brocade 5600 vRouter Firewall Configuration Guide
53-1004253-01
name rule rule-number state { disable | enable }
name rule rule-number state
name rule rule-number state
state are as follows:
state state
state . Related packets are packets related to
Firewall Commands
79