Security Firewall Name <Name> Rule <Rule-Number - Brocade Communications Systems 5600 vRouter Configuration Manual

security firewall name <name> rule <rule-number>
Defines a rule for a firewall rule set.
Syntax
set security firewall name
delete security firewall name
show security firewall name
Parameters
name
The name of a firewall rule set.
rule-number
The numeric identifier of a rule. The identifier ranges from 1 through 9999.
Modes
Configuration mode
Configuration Statement
security {
firewall {
name name {
rule rule-number
}
}
}
Usage Guidelines
Use this command to define a rule within a firewall rule set.
A firewall rule set consists as many as 9,999 configurable rules. Following the last configured rule, a system rule (rule 10000)
with an action of "deny all" is applied.
To avoid having to renumber firewall rules, a good practice is to number rules in increments of 10. This increment allows room
for the insertion of new rules within the rule set.
Use the set form of this command to define a firewall rule within a firewall rule set.
Use the delete form of this command to delete a rule from a firewall rule set.
Use the show form of this command to display a rule from a firewall rule set.
56
name rule rule-number
name rule rule-number
name rule
Firewall Commands
Brocade 5600 vRouter Firewall Configuration Guide
53-1004253-01