Brocade Communications Systems 5600 vRouter Configuration Manual page 75

Modes
Configuration mode
Configuration Statement
security {
firewall {
name name {
rule rule-number {
}
}
}
}
Usage Guidelines
If no then action is specified, then the default action is to drop the packet if police limits are exceeded.
Use the set form of this command to enable or disable policing of firewall rule actions.
Use the delete form of this command to delete the policing value for a rule.
Use the show form of this command to display the policing value for a rule.
Brocade 5600 vRouter Firewall Configuration Guide
53-1004253-01
police {
bandwidth limit
burst size
then {
action accept
action drop
mark {
dscp dscp-value
pcp pcp-number
}
}
}
Firewall Commands
75