Security Zone-Policy Zone <From-Zone> To <To-Zone - Brocade Communications Systems 5600 vRouter Configuration Manual

security zone-policy zone <from-zone> to <to-zone>
Specifies the source zone of traffic to which a policy applies.
Syntax
set security zone-policy zone
delete security zone-policy zone
show security zone-policy
Parameters
from-zone
The name of a security zone from which traffic is originating.
to-zone
The name of a security zone for which traffic is destined.
Modes
Configuration mode
Configuration Statement
security {
zone-policy {
zone from-zone {
to to-zone
}
}
}
Usage Guidelines
Use this command to specify a source zone of traffic. The packet-filtering policy for this "from" zone is applied to all traffic
arriving from the zone.
Use the set form of this command to specify a source zone.
Use the delete form of this command to delete a source zone.
Use the show form of this command to display the configuration of a source zone.
Brocade 5600 vRouter Firewall Configuration Guide
53-1004253-01
from-zone to to-zone
from-zone to to-zone
Zone-Based Firewall Commands
93