Wps Setup; Using The Wps Button; Using The Web Page - SMC Networks SMCWEB-N2 User Manual

SMCWEB-N2 Wireless N Universal Repeater User Manual
Step 5 Select Turn Access Control On. If selected, you can restrict PCs'
access to the wireless network, only allowing specified PCs to access
your network according to their MAC addresses.
Step 6 Click Apply to save your Wireless Card Access List settings.
Now, only devices on this list can wirelessly connect to the SMCWEB-N2 router.

7.5.4 WPS Setup

WPS refers to Wi-Fi Protected Setup.
You can use WPS to establish wireless connection in a quick and secure way if the
uplink AP or terminal (for example, the network adapter) has the WPS function. It is
suggested to first configure wireless encryption for the uplink AP. If you change the
wireless encryption mode after having establishing wireless connection using WPS,
you must use WPS to establish wireless connection again. Note that if the wireless
client does not support WPS you must manually configure the wireless client (such
as SSID, security mode, and password) to make it have the same SSID and
wireless security settings as the router.
The following describes how to configure WPS for the AP mode.

7.5.4.1 Using the WPS Button

In the AP mode with WDS disabled, press the WPS button on the side panel of
SMCWEB-N2 and the WPS button on the client device. SMCWEB-N2 can perform
WPS encrypted connection to the downlink client device.

7.5.4.2 Using the Web Page

You can perform WPS settings using the Web page for configuration.
Choose Wireless Settings > WPS Setup to display the WPS Setup page.
- 53 -