Client Mode Configuration - SMC Networks SMCWEB-N2 User Manual

SMCWEB-N2 Wireless N Universal Repeater User Manual
Interface Settings page and log in to the Web management page
again). Enter the MAC address of the wireless basic station.
Step 3 Click Apply to save the settings.
Then, WDS connection is established between Wireless N Universal Repeaters A
and B.
(3) Configuring Wireless N Universal Repeater C
Configure Wireless N Universal Repeater C in the same way as Wireless N
Universal Repeater A. Note that the IP address of the LAN interface must be
changed to an IP address that does not conflict with IP addresses of existing
computers or devices in the network.

6.5 Client Mode Configuration

Step 1 Click Setup Wizard in the navigation bar on the left pane of the page.
Click Site Survey to search for the wireless network you want to
connect.
Step 2 Enter encryption information of the selected wireless network. Click
Finish to complete the settings.
- 37 -