SMC Networks SMCWEB-N2 User Manual page 45

SMCWEB-N2 Wireless N Universal Repeater User Manual
Enable Wireless Isolation: If selected, wireless clients connected to the

network of the same SSID can access the Internet only, but cannot
communicate with each other.
Name (SSID): Set the name for the wireless network. The SSID can contain

up to 32 characters and can be letters, numerals, underlines, and any
combinations of them. The SSID is case-sensitive.
Mode: Select the wireless mode. Mixed 802.11b/g/n is recommended.

Channel: The channel for transmitting wireless signals. The default channel

is Auto. When you select Auto, SMCWEB-N2 automatically selects the best
channel from the available channels according to actual situations.
Band Width: The bandwidth occupied for wireless signal transmission.

Max Transmission Rate: The maximum transmission rate of SMCWEB-N2.

Security Options: Set the security encryption of the wireless network, to

prevent unauthorized access and listening.
Security Options
None
-
Data encryption is not adopted and the network is not secure. Any stations can
access the network. This option is not recommended.
- 45 -