SMC Networks SMCWBR14-N2 Configuration Manual
Wds configuration guide
Hide thumbs
Also See for SMCWBR14-N2:
- User manual (103 pages) ,
- Overview (2 pages) ,
- User manual (113 pages)
Advertisement
Quick Links
Download this manual
See also:
User Manual
SMCWBR14-N2
1. Log on to admin page of the router.
User Name: Admin (Default) Password: smcadmin
2. Go to Basic Click -> Wireless (Left Hand side Menu)
3.
Scroll down to WIRELESS NETWORK SETTINGS
-> Enable Auto Channel Scan: NO Tick
-> Set Wireless Channel as 2.462 Ghz – CH11
-> Channel Width: 20 MHz
-> Save Settings
WDS Configuration Guide – Repeater
http://192.168.2.1
Advertisement
Related Manuals for SMC Networks SMCWBR14-N2
Summary of Contents for SMC Networks SMCWBR14-N2
- Page 1 SMCWBR14-N2 WDS Configuration Guide – Repeater 1. Log on to admin page of the router. http://192.168.2.1 User Name: Admin (Default) Password: smcadmin 2. Go to Basic Click -> Wireless (Left Hand side Menu) Scroll down to WIRELESS NETWORK SETTINGS -> Enable Auto Channel Scan: NO Tick ->...
- Page 2 4. Scroll down to Security Mode pick: WEP only in the Allowed Client Type. -> Save Settings 5. Scroll down again and type a encryption key in Key 1 -> Save Settings 6. Go to ADVANCED Click -> Advanced Wireless (Left Hand side Menu) ->...
- Page 3 7. Go back to BASIC Click -> Network Settings (Left Hand side Menu) -> Go to WAN PORT MODE: Pick the Bridge Mode -> Scroll down to ROUTER SETTINGS ->Change the Router IP address for your repeater unit (recommended 192.168.2.2). ->Save Settings...