Chapter 6: Unsetting The Alarm (Code/Tag) - Pyronix Enforcer User Manual

C H A P T E R 6 : U N S E T T I N G T H E A L A R M ( C O D E / T A G )
 Enter the building
 The Entry time will start
 Enter your user code
Or
 Present a valid tag to the symbol
circled.
 The level set that the code is assigned
to will be Unset.
 Note: If 'flexi-set' is disabled (see
page 19) then the system will
automatically Unset that level set once
a valid user code or tag is presented.
UNSETTING USING A WIRELESS KEYFOB
PLEASE NOTE: Unsetting with a keyfob will
only be allowed if your engineer has enabled
this.
 To unset via a keyfob. Press the
key.
 The keyfob LED will start to flash
GREEN indicating that the system has
unset.
Page: 10